Tattoo Gun custom vape mod
Dublin Core
Title
Tattoo Gun custom vape mod
Subject
On AussieVapers.com, user studiovape posted a modified tattoo gun which the user can use as a vape as well.
Description
"This was a commissioned piece for a tattoo artist friend of mine, and although there are a few finishing touches (clear heat shrink for the coil etc) this is pretty much done.
The body was bent by hand from a 300mm by 3.18mm bar, and all but a few parts that were salvaged from a cheap tattoo gun from eBay ever part is hand made by me. I was offered a decent pro tattoo machine to adapt, but it ended up more practical to make one from scratch, and add a few genuine tattoo gun parts to finish it off.
I have tried to be as uncompromising in the design as possible to best resemble the real thing.
I picked the Aspire BDC tank as I felt it was the closest to a tattoo tube in the non rebuildable, although coil replaceable tanks.
With the 'low res coil' performance on an unregulated 3.7v battery was a little anemic, so I stripped the higher res head and installed a 1.6Ohm single coil (6/7wrap 32g micro coil with pure silver NR leads running cotton ball) this is much more like it, although I'm not sure my friend is keen to service the coil and swap out the cotton every week or so. Still it is mainly Evods he has used so that will probably be what adorns it when he gets it.
Voltage drop under load is very minimal on the Tattoo gun mod, so it should be a step up from the egos he's used to."
The body was bent by hand from a 300mm by 3.18mm bar, and all but a few parts that were salvaged from a cheap tattoo gun from eBay ever part is hand made by me. I was offered a decent pro tattoo machine to adapt, but it ended up more practical to make one from scratch, and add a few genuine tattoo gun parts to finish it off.
I have tried to be as uncompromising in the design as possible to best resemble the real thing.
I picked the Aspire BDC tank as I felt it was the closest to a tattoo tube in the non rebuildable, although coil replaceable tanks.
With the 'low res coil' performance on an unregulated 3.7v battery was a little anemic, so I stripped the higher res head and installed a 1.6Ohm single coil (6/7wrap 32g micro coil with pure silver NR leads running cotton ball) this is much more like it, although I'm not sure my friend is keen to service the coil and swap out the cotton every week or so. Still it is mainly Evods he has used so that will probably be what adorns it when he gets it.
Voltage drop under load is very minimal on the Tattoo gun mod, so it should be a step up from the egos he's used to."
Creator
studiovape
Source
AussieVapers.com
Date
January 30, 2014
Contributor
Brice Martin
Rights
rights unknown
Type
Forum post
Files
Collection
Citation
studiovape, “Tattoo Gun custom vape mod,” HistoryStudent—Omeka Sites, accessed November 16, 2026, https://schrag.reclaim.hosting/omeka/items/show/182.